GE Biacore X100 Operating Instructions Manual page 14

1 Introduction
1.3 Regulatory information
1.3.5 Other regulations and standards
Standard
EN 50581
Regulatory compliance of
connected equipment
Any equipment connected to Biacore X100 should meet the safety requirements of
IEC/EN/UL/CSA 61010-1, IEC/EN/UL/CSA 60950-1, or other relevant national safety reg-
ulations and standards. The equipment should be installed and used according to the
manufacturer's instructions. Within EU, connected equipment must be CE marked.
14
Description
Technical documentation for the assessment of electrical
and electronic products with respect to the restriction
of hazardous substances
NOTICE
This equipment is not intended for use in residential environments
and may not provide adequate protection to radio reception in
such environments.
Biacore X100 Operating Instructions 28961142 AD