GE Biacore X100 Operating Instructions Manual page 22

2 Safety instructions
2.1 Safety precautions
Maintenance
22
WARNING
All service and repairs, with the exception of operations explicitly
described in the user documentation, must be carried out by per-
sonnel authorized by GE. Do not open any covers or replace any
parts unless specifically stated in the user documentation.
WARNING
The Biacore X100 system contains mains voltage of up to 240 V
AC. Disconnect mains cord before replacing fuses. Do not remove
instrument covers.
WARNING
For continued protection from fire hazard, replace only with same
type and rating of fuse.
WARNING
The injection needle is sharp. Take care when working in the sample
compartment.
WARNING
If the instrument may be contaminated with biohazards, decontam-
inate the instrument before performing maintenance on any instru-
ment parts. Contact your local service representative for further
information about decontamination procedures.
Biacore X100 Operating Instructions 28961142 AD