Table of Contents
Advertisement
DMZ Host: Select to enable or disable the DMZ feature.
DMZ Host IP Address: Enter a IP address of the local host. This feature sets a
local host to be exposed to the Internet
Advance – Used only on Router mode settings
The Advance setting is for the WLAN ADSL Router is configured on Router mode
only. Please refer the Mode setting in page 72.
Wireless
Advanced Settings
These settings are only for more technically advanced users who have a sufficient
knowledge about wireless LAN. These settings should not be changed unless you
know what effect the changes will have on your WLAN ADSL Router.
Authentication Type: Open System: Open System authentication is not required
to be successful while a client may decline to authenticate with any particular
other client. Shared Key: Shared Key is only available if the WEP option is
implemented. Shared Key authentication supports authentication of clients as
either a member of those who know a shared secret key or a member of those who
do not. IEEE 802.11 Shared Key authentication accomplishes this without the
need to transmit the secret key in clear. Requiring the use of the WEP privacy
mechanism. Auto: Auto is the default authentication algorithm. It will change its
authentication type automatically to fulfill client's requirement.
41
Advertisement
Table of Contents
