Table of Contents
Advertisement
UNPACKING AND SETUP
This chapter provides unpacking and setup information for the IEEE 802.11b/g
Wireless ADSL Router.
Unpacking
Open the box of the WLAN ADSL Router and carefully unpack it. The box should
contain the following items:
TEW-436BRM Wireless ADSL Router
CD-Rom (User's Guide)
External power adapter
1 1.5m (5ft) Cat.5 Ethernet Cable
1 RJ-11 (ADSL) cable
If any item is found missing or damaged, please contact your local reseller for
replacement.
Setup
The setup of the WLAN ADSL Router can be performed properly using the
following methods:
The power outlet should be within 1.82 meters (6 feet) of the Broadband Router.
Visually inspect the DC power jack and make sure that it is fully secured to the
power adapter.
Make sure that there is proper heat dissipation and adequate ventilation around
the WLAN ADSL Router. Do not place heavy objects on the WLAN ADSL
Router.
Fix the direction of the antenna. Try to place the WLAN ADSL Router in a
position that can best cover your wireless network. Normally, the higher you
place the antenna, the better the performance will be. The antenna's position
enhances the receiving sensitivity.
4
Advertisement
Table of Contents
