Table of Contents
Advertisement
Channel: Select a transmission channel for wireless communications. The channel
of any wireless device must match the channel selected here in order for the
wireless device to access the LAN and WAN via the WLAN ADSL Router.
Radio Power (mW): The maximum output power for wireless LAN: 15mW,
30mW or 60mW.
Associated Clients: Click the "Show Active Client" button displays the
information of connected wireless clients.
Security
SSID TYPE: The WLAN ADSL Router supports up to four multiple SSID feature
(Multiple Virtual AP), select which AP (Root AP, VAP0~VAP3) will configure the
security setting.
Encryption: There are 4 types of security to be selected. To secure your WLAN,
it's strongly recommended to enable this feature.
WEP: Make sure that all wireless devices on your network are using the same
encryption level and key. Click Set WEP Key button to set the encryption key.
WPA (TKIP): WPA uses Temporal Key Integrity Protocol (TKIP) for data
encryption. TKIP utilized a stronger encryption method and incorporates Message
Integrity Code (MIC) to provide protection against hackers.
WPA2 (AES): WPA2, also known as 802.11i, uses Advanced Encryption
Standard (AES) for data encryption. AES utilized a symmetric 128-bit block data
encryption.
26
Advertisement
Table of Contents
