Intelligent Weighing Technology AGS-6000BL Operation Manual page 13

5.6 SET DISPLAYED VALUE TO ZERO WHEN UNLOADED
By pressing ON/ZERO, a positive or negative weight
displayed will be set to zero and ZERO INDICATOR appears.
Refer to SPECIFICATIONS for maximum zero range.
NOTE:
-When scale is set at OIML and application is legal for
trade. User only needs to press ON/ZERO once when setting
the value to zero. The re-zero function will take place
when reading is stabled
-When scale is set at Non-OIML and application is not
legal for trade. User can set the value to zero at anytime
when pressing ON/ZERO
5.7 TARE OFF THE WEIGHT OF A CONTAINER
When a container is used, follow the below steps to
manually tare off the weight of container and get the
net weight.
a. Remove all loads away from platter
b. Make sure that the ZERO INDICATOR is on
c. Place the container on the platter
d. Press TARE