Instruction For Use - Intelligent Weighing Technology AGS-6000BL Operation Manual

5. INSTRUCTION FOR USE

5.1 BEFORE WEIGHING
Make sure that:
a. The stainless steel platter is placed correctly on
top of load receptor.
b. The scale is placed on a level and strong surface.
c. The scale is turned on.
d. The ZERO INDICATOR is on. If not, press ON/ZERO to
set display to zero.
5.2 WEIGHING
a. Always place an object onto the platter gently.
Excessive force applied to platter may cause damages
to sensor inside scale.
b. The weight of the object would be displayed
automatically.
c. It is a good practice to remove all loads from platter
after weighing. It would prolong the lifetime of
scale.