STEINEL HF 180 Manual page 29

Twilight setting
Examples of use
Twilight operation
Corridors, foyers
Stairs, escalators, moving walkways
Washrooms, toilets, switch rooms, canteens
Sales floor, kindergartens, nursery school rooms,
sports halls
Work rooms: offices, conference and meeting rooms,
precision assembly activities, kitchens
Working areas requiring good light: laboratory,
technical drawing, precision work
Daylight operation
Note: Depending on the mounting location, this setting may need correcting.
The light level is measured at the sensor.
Light function
DIP switch 2
mode
Fully automatic
mode
Fully automatic
mode
Fully automatic
mode
Semi-automatic
mode
Semi-automatic
mode
Semi-automatic
mode
Switch configura-
tion DIP switch 4
ON / ON-OFF
ON-OFF
ON
ON / ON-OFF
ON-OFF
ON
Status
Lighting is
switched OFF
Lighting is
switched ON
Lighting is
switched ON
Lighting is
switched OFF
Lighting is
switched ON
Lighting is
switched ON
- 29 -
Light-level settings
min
1
2
3
4
5
>=6
max
Switch function
Lighting is switched
ON for the stay-ON
time selected
Lighting is switched
OFF for the stay-ON
time selected and
re-triggered on
detecting movement
(inverse mode /
presentation mode)
The stay-ON time se-
lected is re-triggered.
Lighting is switched
ON for the stay-ON
time selected.
Lighting is switched
OFF until it is next
activated.
The stay-ON time
selected is re-
triggered.