Front Panel Controls - T+A DD 1535 R Operating Instructions Manual

Digital surround decoder
Table of Contents

Advertisement

DD 1535 R
ON
DVD
STB
PHONES
AMP
MENU
Opening and closing the flap
The flap is fitted with a snap closure.
To open the flap press lightly at the marked point
(
); the flap will then spring open.
To close the flap raise it and press it lightly against
the machine until the snap closure engages.
The decoder's mains On / Off switch.
• Switching on and off
Pressing the mains button 
decoder on and off. When the machine is switched on
and ready to use, the green LED glows.
• Standby and record ready mode
If you hold the 
 button pressed in for about one
second when the decoder is already switched on, the
machine switches to stand-by mode. Video recorder
recordings can be made with the unit in stand-by
mode; the screen displays the recording source you
have selected (see section 'VCR recordings using
the digital surround decoder').
AV source devices
(viewing and listening source)
 
 
 
 
You can select one of the AV signal sources (DVD,
SETTOPBOX, AUX/AV1, AUX/AV2, VCR1, VCR2 or TV)
as viewing and listening source by briefly pressing one of
the AV source device buttons.
Press the appropriate source button repeatedly to switch
between VCR1 and VCR2 or AUX/AV1 and AUX/AV2.
All manuals and user guides at all-guides.com

Front panel controls

PRO LOGIC IIx
DIGITAL
DTS
OK
OTHERS
AV
VCR
TV
SOUNDFIELD
REC
 switches the
CAM
Notes:
A form of surround sound can also be obtained with
analogue audio devices which are connected to the
stereo amplifier or receiver. Select the desired device on
your stereo amplifier, and switch the system to Surround
mode (
 -button). The sound signals from the
source are now automatically passed from the stereo
amplifier to the DD 1535 R via the TASI interface, and
can be reproduced using ProLogic, NEO:6 or a
simulated sound field..
Cursor block
 
 
These multi-function buttons are used to control all the
menus, and also operate the tuner.
(see section 'Menu control system')
(see section 'Menu control system')
(see section 'Menu control system')
4
(multi-function buttons)
Select button
Change button
Confirm button

Advertisement

Table of Contents
loading

Table of Contents