Table of Contents
Advertisement
In the 'Speaker size menu' you initially adjust the output
signals to suit the existing loudspeaker system.
Main speaker
Center speaker
Surr. speaker
Back speaker
5.1 surnd SPK
Subwoofer
Satellite high pass
Main speaker:
Defines the size and bass capacity of the main left and
right front loudspeakers. Select one of the following
settings:
for
small
Satellit
reproduction is necessarily restricted.
The low bass content (below the set
transition frequency) of the main channel
signals
is
subwoofer, if present.
full range
for larger speakers. The full frequency
range is passed on to the main speaker
channels without restriction.
Center speaker:
Defines the size and bass capacity of the center
speaker. Select one of the following settings:
none
if no center loudspeaker is present. The
center channel is mixed down onto the
left and right main loudspeakers.
Satellit
for small centre loudspeakers. The low
frequency bass signals of the centre
channel
(below
frequency) are mixed onto other suitable
loudspeakers and, if present, the sub-
woofer.
for a center speaker of about the same
full range
size as the main loudspeakers. The full
frequency range is passed on to the
center channel without restriction.
All manuals and user guides at all-guides.com
Speaker size menu
Select
menu point
Speaker size
rull range
full range
full range
2 full range
Surnd+Back
none
80 Hz
return to Loudspeaker menu
/
/
/
/ STOP
speakers
whose
bass
mixed
down
onto
the
the
set
transition
To avoid the loss of any sound information in systems
where not all the loudspeakers (centre, rear and sub-
woofer) are present, the missing components must be
marked as none in the 'Speaker size menu'.
The corresponding sound signal is then distributed over
the channels which are present (Downmix).
Change
value
satellite
full range
none
satellite
none
satellite
none
1 satellite
1 full range
2 full range
Surnd
Back
none
70 80
90
100
50
60
OK
Note:
If your system does not include a center speaker, the
main loudspeakers should be set up not too far away
from the TV set, and ideally should be arranged
symmetrically about it, otherwise it will be very difficult to
localise dialogues on the television screen.
Surround speaker:
Setting the size and bass capability of the surround
loudspeakers. Select the settings as follows:
if no surround loudspeakers are present.
none
The surround channels are mixed down
onto
the
loudspeakers.
Satellit
for small surround loudspeakers. The low
frequency bass signals of the surround
channels
frequency) are mixed by the bass
manager
speakers and, if present, the sub-woofer.
full range
if the bass reproduction of the surround
loudspeakers is very good. The full
frequency range is reproduced by the
surround
restriction.
Note:
Genuine surround reproduction is not possible without
surround loudspeakers!
18
left
and
right
main
(below
the
set
transition
onto
other
suitable
loud-
loudspeakers
without
Advertisement
Table of Contents
