All manuals and user guides at all-guides.com
In the 'Speaker Position Menu' you can enter the
distance from the listening position (in 0.3 m increments)
for each loudspeaker separately.
5.1 Loudspeaker set
Measure the distance between the listening position and
the loudspeakers in your surround system, and enter the
measured distances.
Note:
The maximum distance of a loudspeaker to the listening
position is 12 m. For acoustic reasons greater distances
cannot be recommended, and the system cannot
compensate for timing errors over a range greater than
12 m.
As the illustration shows, you use the select buttons to
move to the input positions in the following sequence.
Output channels not in use (see 'Loudspeaker Menu')
cannot be edited.
Use the change buttons to enter the measured distance
in increments of 0.3 m.
Speaker Position Menu
Recommended loudspeaker arrangement
Select
menu point
Spk position
Front left
2.40 m
Front center
2.10 m
Front right
2.40 m
Surnd right
2.40 m
Back right
2.40 m
Back left
2.40 m
Surnd left
2.40 m
Subwoofer
2.40 m
return to Loudspeaker menu
/
/
/
/ STOP
21
This enables the decoder to compensate for timing
discrepancies due to differences in speaker location.
7.1 Loudspeaker set
Front Box
left
TV
Centre
30°
60°
45°
Surround
left
90°
Back speaker
left
OK
Main loudspeaker front left
•
Center loudspeaker front center
•
Main loudspeaker front right
•
Surround loudspeaker right
•
Back loudspeaker right
•
Back loudspeaker left
•
or back loudspeaker centre
•
Surround loudspeaker left
•
Active subwoofer (any position)
•
Front Box
right
Sub-woofer
30°
60°
45°
Surround
right
Back speaker
right
(front left)
(front centre)
(front rear)
(surnd right)
(back right)
(back left)
(back centre)
(surnd left)
(Sub)