Table of Contents
Advertisement
J27: Software reset
Select front panel reset option
Pin
1-2
2-3
J24:CMOS Jumper
You may set jumper pins to clear CMOS
Pin
1-2
2-3
OPEN1: Chassis Open Detect mainboard protection jumper. (a short-pin cap will be
connected to the top compartment of the system chassis. When the top compartment is
lifted/removed, the board functions will be disabled once the jumper cap is lifted
along with the top compartment. This is to protect the board from being tampered by
anyone who remove the top compartment.
Pin
1
2
CONN3: HS pin header
Pin
1
2
Network Computing Platforms
Description
Hardware Reset
Software Reset
Description
Normal (Default)
Clear CMOS
Description
GROUND
CSOPEN_N
Description
HSWAP_ENABLE_N
GROUND
Advertisement
Table of Contents
