NEC PA1004UL-B User Manual page 134

2. Press the ◀ button to select and [YES] and press the ENTER button.
During projection, if the adjusted values for an input signal have been saved, the lens will shift.
If not, the lens will shift according to the adjusted values stored in the selected [REF. LENS
MEMORY] → [PROFILE] number.
To automatically apply the adjusted values at the time of source selection:
1. From the menu, select [LOAD BY SIGNAL] and press the ENTER button.
2. Press the ▼ button to select and [ON] and press the ENTER button.
This will move the lens automatically to the position at the time of source selection according
to the adjusted values.
NOTE:
• The [LENS MEMORY] function may not produce a completely aligned image (due to tolerances in the lenses) using the adjusted
values stored in the projector. After calling up and applying the adjusted values from the [LENS MEMORY] function, finely adjust
the [LENS SHIFT], [ZOOM] and [FOCUS] to produce the best possible image.
110
5. Using On-Screen Menu