Connecting Your Computer - NEC PA1004UL-B User Manual

6-1. Connecting Your Computer

A computer cable, HDMI cable, or a DisplayPort cable can be used to connect to a computer.
Analog RGB signal connection
• Connect the computer cable to the monitor out terminal (mini D-sub 15 pin) on the computer
and the computer video input terminal on the projector. Please use a computer cable attached
with a ferrite core.
AUDIO OUT
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
COMPUTER IN
COMPUTER IN
Computer cable (sold commercially)
NOTE:
• Please check the operating manual of the computer
as the name, position and direction of the terminal
may differ depending on the computer.
INPUT button on the projector cabinet
COMPUTER
6. Connecting to Other Equipment
AUDIO IN
Stereo mini-plug audio cable (not supplied)
Button on the remote control
160
COMP.