NEC PA1004UL-B User Manual page 117

Using the Entry List
When any source adjustments are made, the adjustments are automatically registered in the Entry
List. The (adjustment values of ) registered signals can be loaded from the Entry List whenever
necessary.
However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been
registered in the Entry List, an error message is then displayed and no additional patterns can be
registered. You should thus delete (adjustment values of ) signals that are no longer needed.
Displaying the Entry list
1. Press the MENU button.
The menu will be displayed.
2. Press the ◀ or ▶ button to select [INPUT].
The [INPUT] list will be displayed.
* This screen belongs to a HDBaseT model.
3. Use the ◀, ▶, ▲, or ▼ to select [ENTRY LIST] and press the ENTER button.
The [ENTRY LIST] windows will be displayed.
If the [ENTRY LIST] window is not displayed, switch the menu to [ADVANCED].
To switch the menu between [ADVANCED] and [BASIC], select [SETUP] → [CONTROL] → [TOOLS]
→ [ADMINISTRATOR MODE] → [MENU MODE]. (→ page 132)
93
5. Using On-Screen Menu