NEC PA1004UL-B User Manual page 130

[INPUT RESOLUTION]
The resolution is assigned automatically when the resolution of the input signal from the computer
video input terminal (analog RGB) cannot be distinguished.
[VIDEO]
Using Noise Reduction [NOISE REDUCTION]
When projecting a video image, you can use the [NOISE REDUCTION] function to reduce the screen
noise (roughness and distortion). This device is equipped with three types of noise reduction func-
tions. Select the function according to the type of noise. Depending on the noise level, the noise
reduction effect can be set to [OFF], [LOW], [MEDIUM] or [HIGH]. [NOISE REDUCTION] can be selected
for SDTV, HDTV signal and component signal input.
RANDOM NR
MOSQUITO NR
BLOCK NR
Selecting Interlaced Progressive Conversion Process Mode [DEINTERLACE]
This function allows you to select an interlaced-to-progressive conversion process for video signals.
NORMAL
MOVIE
STILL
[CONTRAST ENHANCEMENT]
Using the characteristics of the human eye, a picture quality with a sense of contrast and resolution
is achieved.
OFF
AUTO
NORMAL
Reduces flickering random noise in an image.
Reduces mosquito noise that appears around the edges of an image during Blu-ray playback.
Reduces block noise or mosaic-like patterns.
Automatically distinguishes a moving image from a static image to create a distinct image. Please
select [MOVIE] if there are any obvious jitter and noises.
Select when projecting moving images. This is suitable for signals with a lot of jitter and noise.
Select when projecting static images. The video will flicker when a moving image is projected.
[CONTRAST ENHANCEMENT] function is disabled.
Contrast and picture quality are automatically improved using this function.
Adjust the gain manually.
106
5. Using On-Screen Menu