Recording An External Video Signal (Analog Line-In, Hdv/Dv In) - Canon XH A1 Instruction Manual

Recording an External Video Signal
Editing
(Analog Line-In, HDV/DV In)
You can record on the tape an external video signal, either from the analog video input (SD standard) or
from the HDV/DV input (SD or HD standard).
Analog Line-In
1. Connect the camcorder to the analog video device.
For the connection diagram to an analog device refer to Section
2. Set the dial to
3. Open the menu and select [AUDIO SETUP]. Select [DV AUDIO], select a setting option
and close the menu.
4. Connected device: Load the recorded cassette.
5. Press the and
• The camcorder enters the record pause mode. In this mode you can monitor the picture on the screen.
• If you press only the
6. Connected device: Play back the tape.
7. Press the button (or the PAUSE
scene you wish to record appears.
Recording starts.
8. Press the button to stop recording.
9. Connected device: Stop playback.
HDV/DV In
When recording from an external digital device you can select the time code to be used for the recording
made with this camcorder. Select [COPY] to keep the original time code of the video source, or
[REGEN.] to use instead this camcorder's internal time code.
1. Open the menu, select [SIGNAL SETUP] and then select the [TIME CODE] submenu.
2. Select [HDV/DV IN], select a setting option and close the menu.
3. Connect the camcorder to the external video device.
For the connection diagram to a digital device refer to Section
4. Set the dial to
5. Connected device: Load the recorded cassette or disc.
6. Press the and
• The camcorder enters the record pause mode. In this mode you can monitor the picture on the screen.
• If you press only the
7. Connected device: Start the playback.
8. Press the button (or the PAUSE
scene you wish to record appears.
Recording starts.
9. Press the button to stop recording.
10.Connected device: Stop playback.
106
and load a blank cassette.
buttons (or the REC PAUSE button on the wireless controller).
button, recording will start immediately.
button on the wireless controller) when the
and load a blank cassette.
buttons (or the REC PAUSE button on the wireless controller).
button, recording will start immediately.
button on the wireless controller) when the
of Connecting to a Monitor/TV (
4
of Connecting to a Monitor/TV (
3
99).
98).