Canon XH A1 Instruction Manual page 82

5. Select [ EXECUTE] and in the confirmation screen select [EXECUTE] to load the
file.
6. Close the menu.
Loading a Custom Preset File from a Still Image to the Camcorder
With the customized functions (
along with a still image of the recording in
custom preset file later by selecting the still image captured from a specific scene.
1. Select the still image that contains the custom preset file you want to load.
Use the + / – buttons to move between the still images.
2. Open the menu, select [CUSTOMIZE] and then select [META DATA CP].
3. Select [ CARD
4. From the bottom bar, select [
under which you want to store the file on the camcorder.
5. Select [ EXECUTE] and in the confirmation screen select [EXECUTE] to load the
file.
6. Close the menu.
Custom preset files 7 to 9 are predefined settings designed for specific scenes.
- These 3 custom preset files are protected and, as long as the protection is not removed, cannot
be overwritten.
- Even if you deleted or changed the sample custom preset files, you can reset them to the original
values by resetting all the camcorder's settings. Open the menu and select [SYSTEM SETUP/
]. Select [RESET ALL] and select [YES] in the confirmation screen.
- After resetting custom preset files 1 to 6 with the [
same settings.
Custom Preset [7 VIDEO.C]
Custom Preset [8 CINE.V]
Custom Preset [9 CINE.F]
* All other settings are left at their neutral values.
82
83) you can select to save the custom preset settings currently in use
mode. This is very useful when you want to load the
CAMERA] from the column on the left.
SELECT POSITION] and select the preset number
For playback on a consumer-level monitor.
[BLK] = [PRESS], [PED] = -2, [SET] = -2
For playback on a monitor TV with a film-like feel.
[GAM] = [CINE1], [KNE] = [LOW], [BLK] = [STRETCH], [SHP] = -4,
[CMX] = [CINE1], [CGN] = -20, [CPH] = 5, [RBM] = -5, [GRM] = -5
[GBM] = -5, [BRM] = 5, [RGM] = 12
For video transfer to film.
[GAM] = [CINE2], [KNE] = [LOW], [BLK] = [STRETCH], [SHP] = 6,
[CMX] = [CINE2], [RGN] = -8
RESET] option, they will all contain the