Recording An External Video Signal (Analog Line-In, Hdv/Dv In) - Canon XL H1A Instruction Manual

Recording an External Video Signal
Editing
(Analog Line-In, HDV/DV In)
You can record on the tape an external video signal, either from the analog video input (SD standard) or
from the HDV/DV input (SD or HD standard).
Analog Line-In
You can select the audio channels to be recorded along with the video signal.
1. Connect the camcorder to the analog video device.
For the connection diagram to an analog device refer to Section
( 102).
2. Set the POWER dial to
3. Open the menu and select [AUDIO SETUP]. Select [AUDIO MODE], select a setting
option and close the menu.
4. Select the audio input.
Select the input with the INPUT SELECT switch of AUDIO1 (for analog line-in, set it to AUDIO1 or REAR).
5. Connected device: Load the recorded cassette.
6. Press the and
• The camcorder enters the record pause mode. In this mode you can monitor the picture on the screen.
• If you press only the
7. Connected device: Play back the tape.
8. Press the button (or the PAUSE
scene you wish to record appears.
Recording starts.
9. Press the button to stop recording.
10. Connected device: Stop playback.
HDV/DV In
1. Connect the camcorder to the external video device.
For the connection diagram to a digital device refer to Section
2. Set the POWER dial to
3. Connected device: Load the recorded cassette or disc.
4. Press the and
• The camcorder enters the record pause mode. In this mode you can monitor the picture on the screen.
• If you press only the
5. Connected device: Start the playback.
6. Press the button (or the PAUSE
scene you wish to record appears.
Recording starts.
7. Press the button to stop recording.
8. Connected device: Stop playback.
110
and load a blank cassette.
buttons (or the REC PAUSE button on the wireless controller).
button, recording will start immediately.
button on the wireless controller) when the
and load a blank cassette.
buttons (or the REC PAUSE button on the wireless controller).
button, recording will start immediately.
button on the wireless controller) when the
4
of Connecting to a Monitor/TV
3
of Connecting to a Monitor/TV ( 102).