Recording From Digital Video Devices (Dv Dubbing) - Canon MVX150i Instruction Manual

4_D74PAL_E(87-99)
Recording from Digital Video
Devices (DV Dubbing)
E
You can record from other digital video devices equipped with a DV terminal with
virtually no loss in picture and sound quality.
❍ When recording from digital video devices, make sure that "AV \ DV" is not
❍ Anomalous signals sent from the connected device may be recorded as
❍ Copyright protected signals cannot be recorded.
❍ Blank sections may be recorded as anomalous picture.
❍ If the picture does not appear, reconnect the DV cable or turn the camcorder
❍ You can connect only one device with the DV cable.
❍ You can use the camcorder for playback and recording without reconnecting
CAMERA
1. Connect the camcorder to the digital video device.
See Connecting a Digital Video Device (
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
"DV IN" appears.
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
In record pause mode and during recording, you can check the
picture on the screen.
5. Connected Device: Play back the tape.
6. Press the e/a button when the scene you wish to
record appears.
7. Press the 3 button to stop recording.
• Press the e/ a button to pause recording.
• Press the e/ a button again to restart recording.
8. Connected Device: Stop playback.
90
Downloaded From CamcorderManual.com Canon Manuals
03.2.11 5:44 PM
displayed on the screen. If "AV \ DV" is displayed, change the setting
( 93).
anomalous picture (although it may not appear so on the screen), or it may not
be recorded at all.
off and back on again.
the DV cable.
PLAY (VCR)
Page 90
CARD CAMERA
88).
CARD CAMERA