Recording Color Bars/Audio Reference Signal - Canon XH A1 Instruction Manual

Recording Color Bars/Audio Reference Signal

You can generate and record color bars signals and a 1 kHz audio reference signal.
With the customized functions (
([TYPE 1]) and ARIB** multiformat HDTV color bars ([TYPE 2]) and you can also select the strength of
the audio signal (-12 dB or -20 dB).
* Society of Motion Picture and Television Engineers.
** Association of Radio Industries and Businesses.
1. Select the standard of the color bars signal [COLOR BARS] and the strength of the
audio reference signal [1kHz TONE] with the customized functions (
2. Set the OUTPUT switch to BARS.
• The color bars appear and the audio reference signal is emitted (if activated). Press the start/stop button
to record the signal.
• If you set [1kHz TONE] to [OFF] the current audio input (microphone, line in, etc.) will be recorded as the
audio signal.
83) you can choose between SMPTE* standard-definition color bars
OUTPUT switch
83).
E
73