Selecting The Drive Mode - Canon XH A1 Instruction Manual

Hd video camera recorder
Hide thumbs Also See for XH A1:
Table of Contents

Advertisement

Selecting the Drive Mode

Continuous Shooting
High-Speed Continuous
AEB
(Auto Exposure Bracketing)
Single
Changing the Drive Mode
1. Set the
dial to a recording program other than
tape) switch to
2. Press the DRIVE MODE button to switch between the drive modes.
The setting changes with each press of the button.
Continuous Shooting/High-Speed Continuous Shooting
Press and hold the PHOTO button.
A series of still images will be recorded as long as you hold the PHOTO button pressed down.
Maximum number of continuous shots at one time:
Frames per Second
Normal speed
3 frames
- These figures are approximate and vary with the recording conditions and subjects.
- Sufficient space on the memory card is required. The continuous shooting will stop when the card is
full.
Captures a quick series of still images while you hold the PHOTO button
pressed down. For the number of frames per second, refer to the table
below.
The camcorder records a still image in three different exposures (dark,
normal, light in 1/2 EV steps).
Records a single still image when you press the PHOTO button.
DRIVE MODE
button
.
High speed
5 frames
and move the
Maximum Number of
Continuous Shots
60 images
E
PHOTO button
/
(card/
115

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents