F940GOT-SWD-E/LWD-E
7.4
Connection to Bar Code Reader
The F940-GOT can be connected to a bar code reader.
• Applicable bar code readers
The F940-GOT can be connected to any bar code reader whose communication specifica-
tions and data format are as shown below.
Table 7.2 :Communication specifications
Communication port
Communication baud rate
Data length
Stop bit length
Parity
Table 7.3 :Data format
Data (8 bits)
Data
: ASCII code
Header
: None
End code
: CR (0DH)
For the communication setting and sequence programs, refer to the F940GOT Operation
Manual offered separately.
Additional Functions (in Ver3.00 or later) 7.
RS232C
9600bps
8 bit
1 bit
Even
CR (0DH)
7-5