Table of Contents
Advertisement
Figure 5 Securing a power module in the slot
Connecting the power cord
WARNING!
•
Make sure each power cord has a separate circuit breaker.
•
Before connecting a DC power cord to the power source
terminals, make sure the circuit breakers for both the
negative terminal and positive terminal are switched off.
To connect the power cord:
1.
Insert the DC power cord plug into the power receptacle on the
power module, as shown by callout 1 in
2.
Fasten the screw on the plug to secure the plug in place, as
shown by callout 2 in
Figure
6.
10
Figure
6.
Advertisement
Table of Contents
Need help?
Do you have a question about the SecPath DC2400 and is the answer not in the manual?
Questions and answers