Table of Contents
Advertisement
8.2. Display EDID for All Inputs / Outputs
1. READ ALL will read and display the currently assigned EDID for each Input and the EDID from each connected
display.
2. The EDID values for all Inputs and Outputs will be displayed on the left side of the screen.
8.3. Save Configuration for Inputs / Outputs
This function allows you to save an EDID to disk for future use. A common use of this function is storing the EDIDs
for commonly used TVs on disk. These can be recalled from disk (see EDID Learning below) and stored in the EDID
Input locations even if the display is not currently connected.
1. Select an input or an output from the dropdown list:
1. Click "READ" to display the information.
2. Click "SAVE" to save the file.
3. Browse to the location of your choice to save the configuration file.
Suggested Folder Location:
C:\My Documents\Binary\B-120-HDMATRIX\EDIDConfigurations
4. Create a name for the file that clearly describes the contents.
FIGURE 3
8
Advertisement
Table of Contents
