BUBBLE JET PRINTER CD-R Print Guide Table of Contents Preface Introduction Printing on CD-Rs/DVD-Rs (CD-R Direct Print) Items to Prepare Cautions When Printing on CD-Rs/DVD-Rs Attaching the CD-R Tray Removing the CD-R Tray Printing on CD-Rs/DVD-Rs - Windows Printing on CD-Rs/DVD-Rs - Macintosh...
Important The printing quality on CD-R/DVD-R may vary depending on the media you use. Trademark Notices ® • Canon is a registered trademark of Canon Inc. ™ • BJ is a trademark of Canon Inc. ® ®...
Read the following cautions and instructions when printing on CD-Rs or DVD-Rs: • Be sure to use the CD-R tray which is supplied with this printer, and has an “A” on the upper side. • Do not change the position of the paper output tray with the CD-R Tray lever when the CD-R tray is attached.
Attaching the CD-R Tray Setting up the paper output tray Paper Output Tray Extension CD-R Tray Lever Side View Paper printing position Do not change the position of the paper output tray with the CD-R tray lever while printing. 1 1 1 1 Open the paper output tray if it is closed, and be sure the paper output Guide...
Page 6
Placing the CD-R/DVD-R on the CD-R Tray When placing the CD-R/DVD-R on the CD-R tray, do not touch the printing surface of the disc or the reflectors on the CD-R tray. 1 1 1 1 Place the disc on the CD-R tray with the printable surface facing up.
Page 7
Placing the CD-R tray Guide Rails Guide Rollers Guide Rail Guide Rail Align these two arrows ( 1 1 1 1 Hold the center of the CD-R tray. Place it between the guide rails on the left side of the paper output tray. •...
CD-R/DVD-R, allow the printing surface to dry before wiping. Be sure to remove the CD-R tray from the paper output tray after CD-R printing. Keep the CD-R tray with the printer by attaching it to the hooks on the back of the printer.
Page 9
Performing them at once may result in damage to the Printer. • You cannot print on paper when the paper output tray is in the CD-R printing position. Be sure to return the tray to the paper printing position before printing on paper.
Printing on CD-Rs/DVD-Rs - Windows This section explains how to use CD-LabelPrint to print directly on 12 cm CD-Rs and DVD-Rs. Refer to the CD-LabelPrint’s manual for more information about this procedure. To access the manual from the Start menu, click All Programs (or Programs for Windows Me/Windows 2000/Windows 98), CD-LabelPrint, and select Manual.
Click Print. The Print CD Labels dialog box appears. 2 2 2 2 Click Printer... • The Printable Label image on the Print CD Labels dialog box shows the print image of the CD-R tray (rectangle) and the CD-R (circles). The leading edge of the CD-R tray is at the bottom of the image.
Printing on CD-Rs/DVD-Rs - Macintosh This section explains how to use CD-LabelPrint to print directly on 12 cm CD-Rs and DVD-Rs. Refer to the CD-LabelPrint’s manual for more information about this procedure. To access the manual, double-click Manual in the CD-LabelPrint folder. Importing the image to print on the CD-R/DVD-R 1 1 1 1 Double-click the CD-LabelPrint folder...
Page 13
Select Page Setup… in the File menu. The Page Setup dialog box opens. 2 2 2 2 Specify the required settings. Format for : Select your printer. Paper Size : Select CD-R tray A. Orientation : Select the portrait icon. Scale : Enter 100%.
Page 14
7 7 7 7 Click the Quality & Media tab. 8 8 8 8 Select Printable disc (recommended) or Printable disc (others) from Media Type. If the Printable disc (recommended) setting produces unsatisfactory results (e.g. if images are too dark or characters appear blurred), select Printable disc (others).
1. Gently pull out the CD-R tray. If the CD-R tray cannot be pulled out, press the POWER button to turn off the printer, then turn on the printer again. The CD-R tray will automatically be ejected. 2. Place the CD-R tray again, and press the RESUME/CANCEL button. Be careful not to move the paper output tray.
CD-R Printing Errors Displayed in Windows Possible Cause CD-R tray or CD-R/ Ensure that the CD-R tray supplied with this printer (“A” is on the upper side) is in DVD-R is not in place place. Correctly attach the CD-R tray or load CD-R/DVD-R, and press the RESUME/ CANCEL button.
Paper output tray is “Error No: 1856” raised during printing Try This Ensure that the CD-R tray supplied with this printer (“A” is on the upper side) is in place. Correctly attach the CD-R tray or load CD-R/DVD-R, and press the RESUME/CANCEL button.
The POWER Lamp Flashes Orange When a printer error occurs, the POWER lamp flashes. The number of flashes indicates the type of error. Count the flashes and take the appropriate action to correct the error. This section deals with errors on the CD-R tray only. For other errors, refer to the User’s Guide.
Need help?
Do you have a question about the i9950 and is the answer not in the manual?
Questions and answers