Table Of Contents; Job Specification Sheet; Operating Conditions - Hellenbrand H-100-24TC Owner's Manual

This owner's manual is designed to assist owners and
installers with the operation, maintenance and installation of
your new water softener. It is our sincere hope that this manual
is clear, concise and helpful to both owner and installer. We
have included detailed instructions on general operating condi-
tions, pre-installation and installation instructions, start-up, and
timer and meter programming. We have included a trouble-
shooting guide, service instructions and parts diagrams to
assist you.
Owners will appreciate the simplified, illustrated format for
operation, programming and troubleshooting. In the event that
you need professional assistance for servicing your water
softener, please contact the dealer who installed this
system.
MODEL NO. ___________________________________________________________________________________________
*WATER TEST AT TIME OF INSTALLATION
_______ Hardness CaCo
_______ Iron (ppm)
_______ pH
*SIZING INFORMATION
All Water is Softened Except:
_______ Rear Hose Bib
_______ Other _________________________________________________________________________________________
The average family uses 75 gallons per person daily for all water uses in the home, about 50 gallons per person daily if soft water
is not supplied to the toilets, and about 30 gallons per person daily if only hot water is softened.
_______ Daily Water Usage (Gallons/Person)
x _______ Family Size (Number of people in family)
= _______ Total Gallons Per Day
x _______ Grains Per Gallon of Total Compensated Hardness
(Note: Add 3 grains per gallon of hardness for each ppm iron for total compensated hardness)
= _______ Total Grains Per Day
*INSTALLATION DATE __________________________________________________________________________________
*SERIAL NUMBER _____________________________________________________________________________________
NOTES ______________________________________________________________________________________________
______________________________________________________________________________________________________
Your water conditioner has been designed to adequately
handle up to 100 grains per gallon of hardness as well as up to
2 ppm of Ferrous Bicarbonate Iron. This is iron that is dissolved
in an oxygen-free water supply. It is not visible to the eye in a
freshly drawn sample because the water appears clear. But
upon standing in contact with air, the ferrous iron will become
oxidized to the ferric state and start to precipitate as a reddish
brown floc. It can then be seen and if allowed to remain in the
supply will cause discolored water. In order for your conditioner
to remove the iron, air (oxygen) must be kept from coming in
2
All manuals and user guides at all-guides.com

JOB SPECIFICATION SHEET

(gpg) ______ Other______________________
3
______ Other______________________
______ Other______________________
_______ Front Hose Bib _______ Kitchen Cold _______ Toilets _______ All Cold

OPERATING CONDITIONS

TABLE OF CONTENTS

Job Specification Sheet ............................................... Page 2
Operating Conditions ............................................................. 2
Soft Water Basics .................................................................. 3
Frequenty Asked Questions .................................................. 3
Pre-Installation Check List .................................................... 4
Installation Instructions .......................................................... 5
Programming ......................................................................... 6
Displays/Settings ................................................................... 7
Water Softener Disinfection .................................................. 9
Water Softener Draining Procedure ...................................... 9
Trouble Shooting ............................................................ 10-11
Parts Diagrams ............................................................... 12-17
Specifications ................................................................. 18-20
Warranty .............................................................................. 20
contact with water until after it has been passed through the
water conditioner. In some cases, additional equipment may be
required to treat water supplies having special characteristics,
such as: oxidized iron, iron bacteria, low pH, taste and odors, etc.
If any question should exist, contact your dealer.
This conditioner is not intended to be used for treating water that
is microbiologically unsafe or of unknown quality without ad-
equate disinfection before or after the system.