Hellenbrand H-100-24TC Owner's Manual page 13

ITEM NO. DESCRIPTION
ORDER NO.
1 15-V3175-03-L Blue Cover Assy w/H100 Label
2-6 15-V3002 Drive Assy.
2 15-V3107-01 Motor
3 15-V3106-01 Drive Bracket & Spring Clip
4 15-V3108 PC Board
5 15-V3110 Drive Gear 12x36
6 15-V3109 Drive Gear Cover
Not Shown 15-V3186 Transformer 110V-12V
Not Shown 15-V3115-01 Quick Reference Guide
After completing any valve maintenance involving the drive assemlby or the
drive cap assembly and pistons, press and hold NEXT and REGEN buttons for
3 seconds or unplug power source jack from the printed circuit board (black
wire) and plug back in. This resets the electronics and establishes the service
piston position. The display should flash all wording, then flash the software
version (ex: 154) and then reset the valve to the service position.
DRIVE CAP ASSEMBLY, DOWNFLOW PISTON, REGENERANT PISTON
ITEM NO. DESCRIPTION
ORDER NO.
1 15-V3005 Spacer Stack Assy
2 15-V3004 Drive Cap Assy.
3 15-V3135 O-Ring 228
4a 15-V3011* Piston Downflow Assy.
4b 15-V3011-01* Piston Upflow Assy.
5 15-V3174 Regenerant Piston
6 15-V3180 O-ring 337-tank
7 15-V3105 O-ring distributor tube
Not Shown 15-V3193 Service Wrench
*15-V3011 is labeled with DN and 15-V3011-01 is labeled with UP.
Note: The regenerant piston is not used in backwash only applications.
**Standard Option.
Do not use vaseline, oils, other hydrocarbon lubricants or spray silicone anywhere. A silicon lubricant may be used on black o-rings but is not necessary. Avoid any
type of lubricants, including silicone, on red or clear lip seals.
After completing any valve maintenance involving the drive assemlby or the drive cap assembly and pistons, press and hold NEXT and REGEN buttons for 3 seconds
or unplug power source jack from the printed circuit board (black wire) and plug back in. This resets the electronics and establishes the service piston position. The
display should flash all wording, then flash the software version (ex: 154) and then reset the valve to the service position.
All manuals and user guides at all-guides.com
FRONT COVER AND DRIVE ASSEMBLY
QTY.
1
*
1
1
1
3
1
1
1
AND SPACER STACK ASSEMBLY
QTY.
1
1
1
1**
1
1
1
1
1
E





D




Figure 13

Figure 14
7
13