Selecting The Report Types To Send - Hyundai HPC-250HT User Manual

USER MANUAL of HPC-250HT

6.2 Selecting the Report Types to Send

The appropriate set-up of email sending parameters on the "Email" tab page enables the
HPC-250HT to send notification emails in case of an occurred fault event or after connecting
to (Start) and disconnecting from (Stop) the utility network. For enabling/disabling one of the
email sending options tap the button on the "System" tab page of the User Interface
corresponding to the desired action to be performed. The current status of the email sending
possibilities is indicated by "Enabled" / "Disabled" text, respectively.
On the HPC-250HT display, select the System tab for modifying the sending option as
desired.
You can read the current status at the bottom of the page next to their corresponding label
and modifying buttons.
To change the settings simply tab the button corresponding to your new choice. The new
value will be displayed automatically, however to make HPC-250HT to store the new settings,
tapping on the "Save Settings" button is necessary.
PE07019-022-B Page 59 of 69