Volume Adjustment; Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device; Second Mobile Phone Pairing - Second Mobile Phone, Gps, And Sr10 - Sena SP54 User Manual

1.4 Volume Adjustment

You can easily adjust the volume by tapping the (+) Button or the (-) Button. You will hear a beep
when the volume reaches the maximum or minimum level. The volume is set and maintained
independently at different levels for each audio source even when you reboot the headset.
2. PAIRING THE Tufftalk Lite WITH BLUETOOTH DEVICES

2.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device

1. To enter the voice configuration menu, press and hold the Center Button for 10 seconds until
you hear the voice prompt, "Configuration menu".
2. By tapping the (+) Button, you will hear the voice prompt, "Phone pairing".
3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
4. The mobile phone confirms that pairing has completed and the Tufftalk Lite is ready to use.
You will hear a voice prompt, "Your headset is paired".
5. If the pairing process is not completed within three minutes, the Tufftalk Lite will return to
stand-by mode.

2.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10

1. To enter the voice configuration menu, press and hold the Center Button for 10 seconds until
you hear the voice prompt, "Configuration menu".
2. Tap the (+) Button until you hear a voice prompt, "Second mobile phone pairing".
3. Search for Bluetooth devices on your mobile phone. Select the Sena Tufftalk Lite in the list of
the devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
5. The mobile phone confirms that the pairing has completed and the Tufftalk Lite is ready to
use. You will hear a voice prompt, "Your headset is paired"