Sena 10U for Shoei GT-Air Quick Start Guide

Overview

1. Battery
2. Charging LED
3. DC Power Charging & Firmware Upgrade Port
4. Status LED
5. Speakers
6. (+) Button
   
7. Microphone
8. (-) Button
   
9. Antenna
10. Snap Holder

1. (-) Button
   
2. Center Button
   
3. (+) Button
   
4. Multifunction Button
   
5. Battery Slot

Installation

Charging

1. • Red: Charging
   • Blue: Fully charged

Getting Started

Remove the plastic tape from the battery slot to begin using the Remote Control.

Button Operation

Tapping

Double Tapping

Press for 1 sec

Press and Hold

Power On/Off

Headset

Remote Control

Power On

Deep Sleep

Pairing

Note: You can control the headset using the Remote Control only after you pair them together.

Volume Adjustment

Phone, Music Pairing

Select Sena 10U


Enter PIN

Music Operation

/

Mobile Phone

Call Making and Answering

Answer
End
Voice Dial
Speed Dial
Reject

Intercom

Pairing

Start / End

• 1st Friend
  
• 2nd Friend
  
• 3rd Friend
  

Radio

On / Off

Seek Stations

Scan Up FM Band

Save to preset while scanning

Move to Preset Station

I1I → I2I →... I5I... → I9I → I10I

Save or Delete Preset

1 ~ 10, Cancel



or

Setting

Configuration Menu

Using the Sena Device Manager

Connect the headset to your computer via a USB cable. Launch the Sena Device Manager and click DEVICE SETTING to configure the headset settings.

For details about downloading the Sena Device Manager, please refer to the leaflet included in the package.

Using the Sena Smartphone App

1. On your smartphone, download the Sena Smartphone App for Android or iPhone from Google Play or App Store. Please refer to www.sena.com for more details.
2. Pair your smartphone with the headset.
3. Run the Sena Smartphone App. Swipe the screen to the right and tap Setting to configure the headset settings.

Troubleshooting

Remote Control Disconnection

If the Remote Control becomes disconnected with your headset, replace the Remote Control's battery or go through the pairing process again. Meanwhile, you can use the headset control buttons to operate the headset. Please refer to the User's Guide at www.sena.com for details on headset control button operations.

Factory Reset

If you want to restore the 10U to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the default settings and turns off.

Fault Reset

If the 10U is not working properly for any reason, reset by gently pushing the pin-hole reset button located on the left speaker.

Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com

MP0501654_2.0.0_EN_October2018