Sena SRL for Shoei Neotec II Quick Start Guide

Sena SRL for Shoei Neotec II Quick Start Guide

Also See for SRL:

Advertisement

Sena SRL for Shoei Neotec II Quick Start Guide

Product Details

Details

  1. Speaker
  2. (–) Button
  3. Center Button
  4. (+) Button
  5. Microphone
  6. Bluetooth Module

Installation


  1. Installation Step 1

  2. Installation Step 2

  3. Installation Step 3

  4. Installation Step 4

  5. Installation Step 5

  6. Installation Step 6

  7. Installation Step 7

  8. Installation Step 8

  9. Installation Step 9

  10. Installation Step 10

  11. Installation Step 11

  12. Installation Step 12

Button Operation


Tapping


Double Tapping


Press for 1 sec


Press and Hold

Power On/Off

Powering On

Powering On

Powering Off

Powering Off

Volume Adjustment

Volume Up

Volume Up

Volume Down

Volume Down

Bluetooth Pairing (Phone, MP3 and GPS)

Status LED

Select Sena SRL in your mobile phone
Bluetooth Pairing

Enter PIN

Mobile Phone


Answer
Answer Call

End / Reject
End / Reject Call

Voice Dial
Voice Dial

Speed Dial
Speed Dial

Music


Play / Pause music
Play / Pause music

Track forward
Track forward

Track backward
Track backward

Battery Check

Battery Check

Configuration Menu

Configuration Menu

Using the Sena Device Manager

Connect the headset to your computer via a USB cable. Launch the Sena Device Manager and click DEVICE SETTING to configure the headset settings. For more information on downloading the Sena Device Manager, please visit Sena.com.

Using the Sena Smartphone App

  1. On your smartphone, download the Sena Smartphone App for Android or iPhone from Google Play or App Store. Please refer to www.sena.com/headset-app/ for more details.
  2. Pair your smartphone with the headset.
  3. Run the Sena Smartphone App. Swipe the screen to the right and tap Setting to configure the headset settings.

Intercom Pairing

Intercom Pairing

Start / End Intercom

  • 1st Friend
    Start/End Intercom with 1st Friend
  • 2nd Friend
    Start/End Intercom with 2nd Friend
  • 3rd Friend and above
    Start/End Intercom with 3rd Friend
  • 3rd ~ 9th Friend, Cancel
    Start/End Intercom with 3rd-9th Friend

    Confirm

Start / End Group Intercom

Start / End Group Intercom

Note: You can use Group Intercom after saving your own group in the Sena Smartphone App. Please refer to the SRL User's Guide in more details.

Radio

On / Off

On / Off Radio

Seek Station

Seek Station Up

Seek Station Down

Scan Up FM Band

Scan Up FM Band

Save to preset while scanning

Save to Preset while Scanning

Save and Delete Preset

Save and Delete Preset Step 1

1 ~ 10, Cancel
Save and Delete Preset Step 2

Save Preset
or
Delete Preset

Move to Preset Station

Move to Preset Station

Voice Command

Voice Command Step 1
or
Voice Command Step 2

Voice Command Function
"Music" Play/Pause music
"FM radio" FM Radio on/off
"Intercom [one, two, ... , nine]" Start/End each intercom
"Speed dial [one, two, three]" Speed dialing

Troubleshooting

Factory Reset

If you want to restore the SRL to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the default settings and turns off.

Fault Reset

If the SRL is not working properly for any reason, reset by gently pushing the pin-hole reset button located next to the DC Power Charging & Firmware Upgrade Port.
Fault Reset


Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
E-mail: support@sena.com

Videos

Sena SRL Bluetooth Headset Review Video

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Sena SRL for Shoei Neotec II Quick Start Guide

Advertisement

Need help?

Need help?

Do you have a question about the SRL and is the answer not in the manual?

Questions and answers

Table of Contents