Configuration Setting - Sena SP54 User Manual

7. CONFIGURATION SETTING

You can set the configuration of the Tufftalk Lite by the voice menu instruction described below.
1. To enter into voice configuration menu, press and hold the Center Button for 10 seconds until
the LED shows solid blue and you hear high toned double beeps. You will also hear a
voice prompt, "Configuration menu".
2. Tap the (+) Button or the (-) Button to navigate between the menus. You will hear voice
prompts for each menu item as below.
3. You can enable/disable a feature or execute a command by tapping the Center Button.
4. If no button is pressed within 10 seconds, the 10R will exit the configuration and
go back to stand-by mode.
5. If you want to exit the configuration immediately, tap the (+) Button or the (-) Button until
you hear a voice prompt, "Exit configuration", and tap the Center Button.
Label Information
The headphone cover is separated and enclosed in the package.
FCC ID is located on the inner left. You can find the label information as shown.