2
DESCRIPTION
The bare shaft set, if delivered separately, consists of a
support set (A) and a bare shaft kit (B). These two
components are packed separately. If the set is
delivered in a complete pump with pumphead and drive
a flexible coupling (C) is included.
The support set consists of a frame, an adjustable drive
support plate and a coupling guard.
The bare shaft kit consists of a shaft, a hub, a bearing
and a seal. No fasteners are provided for mounting the
drive or gearbox.
To align the pump and the drive use alignment jigs. The
jigs are not included in the package.
Although the instructions in this manual are
demonstrated with the Bredel 10-20 pump
series, these are also applicable to the
APEX10-20 series.
DESCRIPTION
B
A
C
5