Key Digital KD-EXWPSTX Manual page 11

-- SPC EDID xx H yy : Copy EDID from Ouput yy to Input xx
-- SPC EDID xx D zz : Copy EDID from Default EDID zz to Input xx
-- DEFAULT EDID 01 : HDMI 1080i@60, 2CH PCM Audio
-- DEFAULT EDID 02 : HDMI 1080i@60, Audio PCM,DTS/DOLBY
-- DEFAULT EDID 03 : HDMI 1080p@60, Audio 2CH PCM Audio
-- DEFAULT EDID 04 : HDMI 1080p@60, Audio PCM,DTS/DOLBY
-- DEFAULT EDID 05 : HDMI 4Kx2K@60/3D/HDR10/10G, 2CH PCM Audio
-- DEFAULT EDID 06 : HDMI 4Kx2K@60/3D/HDR10/10G, PCM,DTS/DOLBY
-- DEFAULT EDID 07 : HDMI 4Kx2K@60/3D/HDR10/18G, 2CH PCM Audio
-- DEFAULT EDID 08 : HDMI 4Kx2K@60/3D/HDR10/18G, PCM,DTS/DOLBY
-- DEFAULT EDID 09 : DVI Video Max. 1280x720@60, No Audio
-- DEFAULT EDID 10 : DVI Video Max. 1920x1080@60, No Audio
-- DEFAULT EDID 11 : 4Kx2K@60, 18G, 2CH AUDIO --> 1080p Down
-- DEFAULT EDID 12 : 4Kx2K@60, 18G, DOLBY/DTS 5.1 --> 1080p Down
--
-- System Control Setup Commands:
-- SPC AS x : Set Auto Sense Mode x = [0:OFF,1=AUTO,2=FORCED ON]
-- SPC FB E/D : Enable/Disable Front Panel Buttons
-- SPC DF : Reset to Factory Defaults
-------------------------------------------------------------------------
Status Command (STA). Returns unit status and settings in readable format:
KD-EXWPSTX> STA
-------------------------------------------------------------------------
--
-------------------------------------------------------------------------
-- KD-EXWPSTX
-- Front Panel Button : Enabled
-- Auto Sensing Mode
-- Service: Baud Rate=115200bps, Data=8bit, Parity=None, Stop=1bit
--
-- HDMI Input 01 : EDID = DEFAULT A, LINK = ON
-- USB C Input 02 : EDID = DEFAULT A, LINK = OFF
--
-- CAT5e/6 Output : Input = 01, Output = ON , LINK = ON , DBG = OFF
-------------------------------------------------------------------------
Street Mt. Vernon, NY 10553 • www.keydigital.com
rd
521 East 3
Key Digital Systems STATUS
: OFF
F/W Version : 1.00
--
Rev 1.0 – Nov, 2020
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
11