Step 5 - To Manually Feed The Line; Stopping - Qualcast GGT600A1 Assembly Manual

Operating the Grass Trimmer
Step 5 – To Manually Feed The Line
N
A
If required, line can be fed out manually.
O
To operate, press and release manual line feed button (A), whilst gently pull out the lines until the
lines reach the line cutter. B
When the required amount of line is fed out, gently pull on the second line (there is no need to
press the manual line feed button again)
If the line extends past the line cutter, too much line has been fed out.
If too much line is fed out, remove the spool cap and click spool anti-clockwise until the line is at the
desired length.

Stopping

P
Stopping
Release the switch to stop
16
A
Customer Helpline 0344 801 0979
ORIGINAL INSTRUCTIONS