Plug Replacement(Uk & Ireland Only) - Qualcast GGT600A1 Assembly Manual

Plug Replacement(UK & Ireland Only)
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
If you need to replace the fitted plug then follow the instructions below.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE = NEUTRAL
BROWN = LIVE
As the colors of the wires in the mains lead of this appliance may not correspond with the colored
markings identifying the terminals in your plug, proceed as follows. The wire which is colored blue
must be connected to the terminal which is marked with N. The wire which is colored brown must be
connected to the terminal which is marked with L.
WARNING: Never connect live or neutral wires to the earth terminal of the plug. Only fit an
approved 13A BS1363/A plug and the correct rated fuse.
NOTE
If a moulded plug is fitted and has to be removed take great care in disposing of the plug and
:
severed cable, it must be destroyed to prevent engaging into a socket.
22
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
Customer Helpline 0344 801 0979
ORIGINAL INSTRUCTIONS