STARTING SYSTEM. Quick & easy to start. ROTATING REAR HANDLE. For greater control & comfort. AFTER SALES SUPPORT UK / IRELAND HELPLINE NO 0151 6491500 REP . IRELAND HELPLINE NO 1890 946244 WEB SUPPORT www.einhell-uk.co.uk MODEL: QG-PH2652 MANUFACTURERS ARTICLE NO: 34.038.28...
Contents Safety Guide Product Diagrams 1 0. Technical Data Assembly Declaration of Conformity Product Guarantee Read and follow the operating instructions and safety information before using for the first time. Helpline No. UK 0151 649 1500 / IRE 189 094 6244...
Safety information: the affected area first. 1. This machine can cause serious injuries. Read - Always empty the tank out in the open. the instructions for use carefully to discover how to - Do not inhale fuel vapors. They are toxic. use it correctly: 10.
Additional safety instructions serious injuries to the user or people nearby and may also damage the machine. If you strike an item by accident, switch off 1. Store the machine in a safe place. Carefully open the fuel tank cap the machine immediately and check it.
1. Safety regulations 11. Maintain a distance of at least 15 m from other persons. The corresponding safety information can be 2. Layout and items supplied found in the enclosed booklet. (Fig. 1-2) CAUTION! Read all safety regulations and instructions. 1.
3. Proper use 4. Technical data Engine type: Important. This hedge trimmer is 2-stroke engine, air-cooled, chrome cylinder suitable for cutting hedges, bushes and shrubs. Engine output (max.): 0.8kW / 1.1hp Displacement: 25.4ccm IMPORTANT! Idle speed of engine: 3200 min Please note that our equipment has not Max.
positions facilitate working above head height or throttle lever by pressing the locking knob in other places with different access. (Fig. 3/Item 7) at the same time. Please note: The rotary handle may only be 6. Hold the machine by the front handle in your adjusted when the engine is switched off.
Normal procedure: 7.2 Maintenance Let go of the throttle lever and wait until the Always switch off the head trimmer and remove engine has changed to idling speed. Then set the spark plug boot before carrying out any the ON/OFF switch to “Stop” or “0”. maintenance work.
If the engine stalls when the throttle is not pressed copper wire brush. Thereafter service the spark and you have ruled out all the other causes listed plug after every 50 hours of operation. in section 9 Troubleshooting, the idling speed ‘The spark plug is located at the front of the engine by the front handle (Fig.
Please quote the following data when ordering rate of corrosion of metals. Do not store the replacement parts: machine on or near fertilizers or other chemicals. • Type of machine (QG-PH2652) • Article number of the machine (34.038.28) Restarting • Identification number of the machine (11010) 1.
Please adhere to the following maintenance periods in order to ensure a failure-free operation. Important! Fill in engine oil and fuel before starting up the engine for the first time. After an After an After an After an Before operating operating operating operating...