Page 2
Version Information Version Release Date Notes 06/18 Initial release AT-HDR-H2H-44MA...
Page 3
Welcome to Atlona! Thank you for purchasing this Atlona product. We hope you enjoy it and will take a extra few moments to register your new purchase. Registration only takes a few minutes and protects this product against theft or loss. In addition, you will receive notifications of product updates and firmware.
Page 4
Atlona requires that products returned are properly packed, preferably in the original carton, for shipping. Cartons not bearing a return authorization or case number will be refused. Atlona, at its sole discretion, reserves the right to reject any products received without advanced authorization. Authorizations can be requested by calling 1-877-536-3976 (US toll free) or 1-408- 962-0515 (US/international) or via Atlona’s website at www.atlona.com.
Page 5
Damage, deterioration or malfunction resulting from the installation or removal of this product from any installation, any unauthorized tampering with this product, any repairs attempted by anyone unauthorized by Atlona to make such repairs, or any other cause which does not relate directly to a defect in materials and/or workmanship of this product.
Page 6
Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations. AT-HDR-H2H-44MA...
Table of Contents Introduction Features Package Contents Panel Description Installation Control Audio Mounting Instructions Connection Instructions Connection Diagram WebGUI IR Remote Control Appendix Specifications AT-HDR-H2H-44MA...
Introduction The Atlona AT-HDR-H2H-44MA is an 4×4 HDMI matrix switcher for high dynamic range (HDR) formats. It is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. The AT-HDR-H2H-44MA is ideal for professional HDMI signal routing in residential and commercial applications were a number of AV sources must be shared throughout four zones to reduce the installed equipment footprint and to reduce the costs associated with multiple, redundant devices.
Panel Description POWER ENTER AT-HDR-H2H-44MA CANCEL EDID INFO AT-HDR-H2H-44MA RX TX HDMI IN HDMI OUT HDMI OUT AUDIO OUT RS-232 IR IN DC 24V Function Buttons AUDIO OUT Power - Sets the unit in and out of standby. This port provides source audio 2CH de-embedding.
IR IN is connected by a ground and signal wire. RS-232 cable and connect as Use with 3rd party control systems. For easy RX (receive), TX (transmit) and termination, Atlona recommends using the 2 (Ground). meter IR cable AT-LC-CS-IR-2M. Audio Connect to an audio DSP, amplifier, or other audio distribution or player devices.
Installation Mounting Instructions The AT-HDR-H2H-44MA can be placed freestanding on top of a desk, a table, or in a cabinet. To prevent damage to the surfaces or unnecessary movement of the matrix, four feet have been included. Rack installation 1. Remove the front two case screws from the sides of the case.
Page 12
Installation Surface mounting The AT-HDR-H2H-44MA can be placed freestanding on top of a desk, a table, or in a cabinet. To prevent damage to the surfaces or unnecessary movement of the matrix, four feet have been included. 1. Turn the unit upside down.
5. Connect the power supply to an AC outlet. Connection Diagram Matrix Mutli-zone Amplifier Blu-ray Player AT -HD P BO 24 V Set-Top Box Display TP UT TP UT Media Player TP UT TP UT Display Automation -H 2H AT -H AT-HDR-H2H-44MA Control System AT-HDR-EX-70-2PS-RX AT-HDR-EX-70-2PS-TX Projector AT-HDR-H2H-44MA...
WebGUI The AT-HDR-H2H-44MA includes a built-in webGUI, which allows easy management and control of all features. Follow the instructions below to access the webGUI. 1. View the IP address of the unit using the front panel OSD. • Press the FNC button.
Page 15
Type the name in the box, and press save. Analog Audio - Mute and unmute the output audio on the selected Analog Audio port. Preset Store - Save the current I/O route to memory. Recall - Load a previously saved I/O route. AT-HDR-H2H-44MA...
Page 16
1152000, 8, None, and 1. Select EDID from the top menu. EDID Settings Input - Select the EDID from the drop down list. EDID Saved Save from - Save the output’s EDID to memory to be loaded to the inputs. AT-HDR-H2H-44MA...
Page 17
Telnet Login Mode - Toggle telnet login mode on and off. If on, a username and password will be required to control the unit via TCP/IP. Telnet / SSH Timeout - Set the amount of time between actions before the current user is logged out. Broadcast - Toggles broadcast on and off. AT-HDR-H2H-44MA...
Page 18
Reset to Default - Select to set the unit back to the original factory settings. Firmware Update - Press Choose File to search the local PC for the most recent firmware file. Press Update once the file is selected. AT-HDR-H2H-44MA...
IR Remote Control The AT-HDR-H2H-44MA comes with an IR Remote Control for easy routing. Power On - Turn the unit on. Power Off - Set the unit into standby mode. Power Output - Select the number key for the corresponding output port for routing.
Output: 24V DC, 2.7A Dimensions Inches Millimeters H x W x D 1.73 x 17.24 x 10.00 44.00 x 438.00 x 254.00 H x W x D, w/feet/ears 2.18 x 18.93 x 10.23 55.50 x 481.00 x 260.00 Rack Size 1 RU AT-HDR-H2H-44MA...
Page 21
Appendix Weight Pounds Kilograms Device 6.10 2.78 Certification Power Supply CE, FCC, UL, and LVD certificates Level VI compliant Unit CE, FCC AT-HDR-H2H-44MA...