Continuous Shooting Ana Exposure Bracketing - Canon HR10 Instruction Manual

.... i J iiii jii! !ill ;::i? ii(?¸!¸¸¸¸¸
dark the assist lamp may light up briefly
in order to enable the camcorder to
focus more accurately (AF-assist lamp).
You can also set [AF AST LAMP] to
[[_11 OFF] so the assist lamp does not
light up (_ 49).
- The camcorder may not be able to
focus even if the AF-assist lamp is on.
- The brightness of the AF-assist lamp
could be an inconvenience. Consider
turning it off in public places such as
restaurants.
ContinuousShooting and Exposure
Bracketing(Drive Mode)
Take a series of pictures of a moving
subject or record the same picture in 3
levels of exposure in order to choose
later the picture you like the best.
I
Mode switch: P (except for the
[[]FIREWORKS] recording program).
Options
* Default value
Captures a series of still images as long as you
hold _ pressed down. For the nunlber
of frames per second, refer to the sidebar on
page 79.
!raoin
The camcorder records a still image in three
different exposures (dark normal, light in 1/2
EV steps), allowing you to choose the shot you
like the best.
,°.o. oNc 46 o
([_ 27) @ @
_,.'_)
Icon of the currently selected
FUNC.I _ Drive Mode
#
'._i! _1 Desired option I
Maximum number o fcontinuous s hots
×?
[_ Normal speed 3 frames 60 u_qages
_ High speed 5 frames
Using the flash 2.1 frames
These figures are approximate and var_ with me recoramg conditions and subjects.
The actual number of frames per second will be lower when ,_ camcorder shake warning)
is displayed on the screen.
79