Canon HR10 Instruction Manual page 107

TEMPERATURETOO HIGH The camcorder has exceeded its operational temperature, Turn off the
CANNOT PLAYBACK camcorder and let it cool down before resuming use.
CANNOT DIVIDETHE SCENE You may not be able to divide very short scenes.
Scenes cannot be divided when the disc already contains B99 scenes.
You may not be able to further divide scenes shorter th an 5 seconds that were
created by dividing a previous scene.
The dual-layered disc you inserted cannot be used with this camcorder. 7 PLEASE USE ONLYTHE
RECOMMENDED DISCS
DISC IS FINALIZED CANNOT
RECORD
UNFINALIZETHE DISC
DISC IS PROTECTED
CANNOT READ THE DISC
CHECKTHE DISC
• ACCESS ERROR
• DISCACCESS FAILURE
CHECKTHE DISC
DISC COVERIS OPEN
DISC MUST BE FINALIZEDTO
PLAY BACKIN COMPATIBLE
PLAYERS
NO DISC
LOADINGTHE DISC
AVOIDMOVING THE CAMCORDER
UNABLE TO RECOVERDATA
You cannot record additional scenes on a finalized DVD-R/DVD-R DL disc,
You cannot record additional scenes or unfinalize a DVD-RW disc (HD quality,
or SB quality (VIDEO mode)) that was finalized using another digital device.
Youcannot record additional scenes on a finalized DVD-RW disc (HD quality, or
SB quality (VIDEOmode)). Unfinalize the disc first.
The disc is protected. Replace the disc or remove the disc protection.
Disc could not be read. Try cleaning it or replace the disc.
This message can also appear if condensation has formed. Wait until the
camcorder dries completely before resuming use.
This message can also appear if the camcorder has exceeded its operational
temperature. Turn off the camcorder and let it cool down before resuming use.
The disc may not be loaded correctly. Try removing the disc and reinserting it.
There was an error when reading the disc or attempting to write onto it. Try
cleaning the disc or replace it.
This message can also appear if condensation has formed. Wait until the
camcorder dries completely before resuming use.
The disc may not be loaded correctly. Try removing the disc and reinserting it.
Close the disc cover.
Be sure to finalize the disc and check the compatibility of the device before
playing back the disc on external DVD devices.
No disc is loaded. Insert a disc.
This message can also appear if condensation has formed. Wait until the
camcorder dries completely before resuming use.
The disc is being read. Wait before you start recording.
Try not to move the camcorder while the image is being recorded.
Could not recover a corrupted file.
This message can also appear if condensation has formed. If you suspect
condensation isthe reason, do not initialize the disc and wait until the
camcorder dries completely before resuming use.
66
111
114
32
111
114
32
68
32
114
114
107