Canon HR10 Instruction Manual page 87

.... [][iii[ii!!!i:: i 'i¸i¸¸ ii()!
Options
[_ PAPERSIZE]
Available paper sizes vary depending on the
printer model.
[ I_ PAPER TYPE]
Select [PHOTO], [FASTPHOTO], [PLAIN]or
[DEFAULT].
[_ PAGELAYOUT]
Select [DEFAULT]or one of the following
available page layouts,
[BORDERED]:Prints the whole image area
almost exactly as the recorded still image,
[BORDERLESS]:Enlarges the center portion of
the still image to fit the width/height ratio of the
selected paper size. The top, bottom and sides
of the still image may be slightly trimmed out.
[2-UP], [4-UP], [8-UP], [9-UP], [16-UP]: Referto
the sidebar on page 87.
Select [ON], [OFF] or [DEFAULT].
E.o
The print effect can be used with printers
compatible with the Image Optimize function to
achieve higher quality prints Select [ON], [OFF]
or [DEFAULT].
Canon PIXMA/SELPHY DS printers: You can
also select [VIVID],[NR] and [VIVlD+NR].
Select 1-99 copies.
_ NOTES
Print setting options and [DEFAULT]
settings vary depending on the printer
model. For details, refer to the printer's
instruction manual.
PrintingMultipleImageson the sameSheet[2,UP],[4-UP],etc.
When using Canon printers you can print the same still image multiple times on
the same sheet of paper, Use the following table as a guideline for the
recommended numbe r of copies dePending on the [_ PAPER S!ZE] setting.
PIXMA
SELPHYDS 2.4.9 or 161
SELPHYCP 2.4 or 82 2 or 4 2 or 4
SELPHYES 2 4 or 8" 2 or 4 2 or 4
1 You can also use the soeclal sticker sheets.
2 Wher you use tne wlde-sizea Dnoto paper with the [DEFAULT] setting, you can also use
[2-UP] or [4-UP].
a With the [8-UP] setting, you can also use _ne seecial sticker sheets.
87