Additionalinformation; Troubleshooting - Canon HR10 Instruction Manual

AdditionalInformation
This chapter contains troubleshooting advice, screen messages,
handling and maintenance tips, and other information.
Troubleshooting
If you have a problem with your camcorder, refer to this checklist. Consult your dealer
or a Canon Service Center if the problem persists.
Power Source
• Camcorder will not turn on.
• The camcorder switches off by
itself.
• The disc compartment cover will
not open.
• LCD/viewfinder switches on and
off.
The charge indicatorflashes rapidly
(approx. twice per second)
• Battery pack will not charge.
• The charge indicator flashes very
slowly (about once every 2
seconds).
Battery pack is exhausted. Replace or charge the battery pack.
Attach the battery pack correctly.
Charging has stopped because the compact power adapter or the battery
pack is faulty. Consult a Canon Service Center.
Charge the battery pack in temperatures between O °C and 40 °C (32 °P
and 104 °P).
Battery packs become hot with use and may not charge. When the battery
pack is outside the charging temperature range, the Crib (charge)
indicator will flash irregularly. The charging will start once the battery pack
temperature is below 40 °C (104 °P).
The battery pack is damaged. Use a different battery pack.
iiiiiliiiiii i/
23
Recording/Playback
Buttons will not work. Turn on the camcorder.
Abnormal characters appear on the
screen. The camcorder does not
operate properly.
appears on the screen.
<_ lights up in red.
The wireless controller will not work.
Load a disc.
Disconnect the power source and reconnect it after a short time. If the
problem still persists, disconnect the power source and press the RESET
button with a pointed item. Pressing the RESETbutton resets all settings.
Load a disc and close the disc compartment cover.
Battery pack is exhausted. Replace or charge the battery pack.
Set [WL.REMOTE] to ION].
Replace the battery of the wireless controller.
32
23
52
25
101