Listof Messages - Canon HR10 Instruction Manual
Canon hd camcorder
Hide thumbs
Also See for HR10:
- Instruction manual (152 pages) ,
- Software manual (60 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
Add _:iosal _fo mat on
Printing
The printer is not operating even
Disconnect the USB cable and turn off the camcorder and the printer. After
though the camcorder and printer are
a short while, turn them on again, set the camcorder to (#/._/_
mode
correctly connected,
and restore the connect on.
Others
Acamcorder,rattling
can be heard from the
Theis
notinternala
malfunction.lens
fixture can move when the camcorder is turned off. This
-
Listof Messages
CHANGETHE BATTERYPACK
CANNOT ENTERTHE
(_
STANDBY MODE NOW
UNABLE TO RECOGNIZETHE
RECORDINGMODE OFTHE DISC
• TEMPERATURETOO HIGH
CANNOT RECORD
• TEMPERATURETOO HIGH
CANNOT REMOVEDISC
• CANNOT RECORD
• CANNOT RECORD
CHECKTHE DISC
REACHEDTHE MAXIMUM
NUMBER OF SCENES
CANNOT PLAY DISC
a.6.ai_o
Battery pack is exhausted. Replace or charge the battery pack,
The camcorder cannot enter the standby mode while the disc is being
recognized after first inserting it or if the remaining battery charge is too low.
You inserted a type of disc not supported by this camcorder,
The disc may not be recognized by this can]corder if it was initialized or
recorded using a different device,
You inserted a disc recorded in a different television system (PAL or SECAM).
The camcorder has exceeded its operational temperature, Disconnect the
compact power adapter and remove the battery pack, Let the camcorder cool
down before resuming use.
There is a problem with the disc, Replace the disc,
This message can also appear if condensation has formed, Wait until the
camcorder dries completely before resuming use.
The disc's recording surface may be dirty or scratched,
The maximum number of scenes has been reached, Delete some recordings
(DVD-RW in HD quality, or SD quality (VRmode)) to free some space or replace
the disc,
The disc is dirty or you attempted to play back a type of disc not supported by
this camcorder,
This message can also appear if condensation has formed. Wait until the
camcorder dries completely before resuming use.
23
39
5
32
114
43
5
114
106
Advertisement
Table of Contents
