Continuous Shooting And Exposure Bracketing (Drive Mode) - Canon HR10 Instruction Manual

Captures a series of still images as long as you
hold
I
PHOTO]
pressed down. For the number
of frames per second, refer to the sidebar on
page 79.
The camcorder records a still image in three
different exposures (dark, normal, light in 1/2
EV steps), allowing you to choose the shot you
like the best.
dark the assist lamp may light up briefly
in order to enable the camcorder to
focus more accurately (AF-assist lamp).
You can also set [AF AST LAMP] to
[ a
OFF] so the assist lamp does not
light up (OJ 49).
- The camcorder may not be able to
focus even if the AF-assist lamp is on.
- The brightness of the AF-assist lamp
could be an inconvenience. Consider
turning.it off in public places such as
restaurants.
Continuous Shooting and Exposure
Bracketing (Drive Mode)
Take a series of pictures of a moving
subject or record the same picture in 3
levels of exposure in order to choose
later the picture you like the best.
POINTS TO CHECK
Options
FUNC.
(CO
27)
fUNC
@)
• Default value
I
.... .
[CA~RAII
(OJ 26)
Icon of the currently selected
[FUNC.] ¢
Drive Mode
Mode switch:
P
(except for the
[IIFIREWORKS]
recording program).
Maximum number of continuous shots
[FUNC.)
¢:ll
Desired option
High speed
Using the flash
5 frames
2.1 frames
60 images
These figures are approximate and vary with the recording conditions and subjects.
The actual number of frames per second will be lower when
~di
(camcorder shake warning)
is displayed on the screen.
79
Captures a series of still images as long as you
hold
I
PHOTO]
pressed down. For the number
of frames per second, refer to the sidebar on
page 79.
The camcorder records a still image in three
different exposures (dark, normal, light in 1/2
EV steps), allowing you to choose the shot you
like the best.
dark the assist lamp may light up briefly
in order to enable the camcorder to
focus more accurately (AF-assist lamp).
You can also set [AF AST LAMP] to
[ a
OFF] so the assist lamp does not
light up (OJ 49).
- The camcorder may not be able to
focus even if the AF-assist lamp is on.
- The brightness of the AF-assist lamp
could be an inconvenience. Consider
turning.it off in public places such as
restaurants.
Continuous Shooting and Exposure
Bracketing (Drive Mode)
Take a series of pictures of a moving
subject or record the same picture in 3
levels of exposure in order to choose
later the picture you like the best.
POINTS TO CHECK
Options
FUNC.
(CO
27)
fUNC
@)
• Default value
I
.... .
[CA~RAII
(OJ 26)
Icon of the currently selected
[FUNC.] ¢
Drive Mode
Mode switch:
P
(except for the
[IIFIREWORKS]
recording program).
Maximum number of continuous shots
[FUNC.)
¢:ll
Desired option
High speed
Using the flash
5 frames
2.1 frames
60 images
These figures are approximate and vary with the recording conditions and subjects.
The actual number of frames per second will be lower when
~di
(camcorder shake warning)
is displayed on the screen.
79