Table of Contents
Advertisement
SKL101, SKS101
➤ Allow the burners to cool down before cleaning them.
➤ Remove the burner grate.
➤ Clean the surface of the slide out kitchen. In particular, remove any sticky grease
and oil carefully.
9
Troubleshooting
If the burner does not light immediately, proceed as follows:
➤ Check if there is enough gas in the gas cylinder.
➤ Light the burner manually in accordance with chapter "Manual ignition" on
page 10.
➤ If the burner does not ignite, consult a specialist.
10
Maintenance
For safety reasons, the device must be inspected every year by a specialist to ensure
it functions correctly, and to have any defects repaired.
➤ During the annual inspection of the device, pay particular attention to the follow-
ing functions:
– Absence of gas leaks
– Burning safety and flame stability
– Fresh air supply
– Safety and regulating devices (burner taps)
➤ Check that the installation location conforms to the applicable local regulations.
➤ Check the following components for dirt and clean, if necessary:
– Gas outlets on the burners
– Burner heads
– Thermocouple
➤ Check whether the distance between the burner head and the thermocouple is
correctly set (approx. 1 – 3 mm).
EN
Troubleshooting
13
Advertisement
Table of Contents
