Download Print this page

Dometic CC 05 Operating And Installation Instructions

Glass ceramic gas cooktop

Advertisement

Quick Links

Operating and Installation Instructions
for
CRAMER Glass Ceramic Gas Cooktop
Model CC 05
GB
GB
CE-0085

Advertisement

loading

Summary of Contents for Dometic CC 05

  • Page 1 Operating and Installation Instructions CRAMER Glass Ceramic Gas Cooktop Model CC 05 CE-0085...
  • Page 2 Congratulations on your purchase of the Cramer gas glass ceramic cooktop CC05. You have chosen a cooking appliance that offers the convenience found in most modern-day households. A. O p e r a t i n g I n s t r u c t i o n s 1.
  • Page 3 Important: During initial startup and after replacing the gas cylinder, ignition may take longer than 15 seconds due to air in the gas lines. 1.2 Operation Important: the surfaces of the glass ceramic cooking zones become HOT during operation, even though no open flame is visible. Therefore, DO NOT ALLOW CHILDREN near the appliance! The appliance has two burners.
  • Page 4 2.2 Inspection of the liquid gas system: When are the inspections conducted? before the first-time operation at intervals of 2 years What inspection regulations apply? EN 1949 EN 1646-1 EN 721 What else must be inspected? the installation location together with the appliance the gas seals of the system and appliance burning safety fresh air supply to the appliance and installation location...
  • Page 5 d) "cera-fix" or "Collo profi" The choice of what to use depends on how dirty the cooktop is: a) Light spills that are not burned on can be wiped off with a damp cloth. b) Larger, dried-on spills can be easily removed with the razor blade scraper. c) Calcium and water deposits, grease and metallic discolorations can be cleaned with a suitable product, e.g.
  • Page 6 Keep the original packing material. Complaints can be processed only if the appliance is sent in the original package. B . I n s t a l l a t i o n i n s t r u c t i o n s 1.
  • Page 7 If the gas tap becomes sluggish or jammed, then it must either be replaced or the affected tap removed from the chamber, cleaned in benzine and lubricated with a special gas tap grease, e.g. type "Staburgas no. 32" from the Klüber company in Munich. This work must be carried out by a professional gas technician.
  • Page 8 3. Connection of the appliance to the gas supply Only gas-tight fittings may be used for connecting the appliance to gas lines, in accordance with EN 1949. The pipes for connecting the appliance should be made of galvanized iron or of copper. These pipes must be used with a gas-tight fitting.
  • Page 9 6. Visual check of flame The burners of the Cramer glass ceramic cooktop burn beneath the glass ceramic panel. Due to the dark shade of the panel, the ignited burner is not visible until approximately 1 minute after ignition. Due to a patented feature of the burner, only part of the burner surface is red hot, resulting in a pattern similar to a cake from which every other piece has been eaten.
  • Page 10 9. Mounting the appliance For the installation of the appliance, there must be a free space as indicated in Fig. 1 – 6, depending on the individual model (see type plate on appliance). The installation location is limited only as follows: there must be a distance of at least 400 mm between the cooktop and any furniture above (e.g.
  • Page 11 Fig. 2 Exhaust gas and fresh air inlet flues, horizontal right rear (outside wall flue system, see Fig. 6) Truma flue pipe Art.no. 39580-00 Cramer air inlet pipe Cramer outside double flue Truma flue pipe Art.no. 39320-00 Fig. 3 Exhaust gas and fresh air inlet flues, horizontal right side (outside wall flue system, see Fig.
  • Page 12 Fig. 4 Exhaust gas and fresh air inlet flues, horizontal left side (outside wall flue system, see Fig. 6) Cramer outside double flue Cramer air inlet pipe Truma flue pipe 55 Truma flue pipe 80 Art.no. 39580-00 Art.no. 39320-00 Fig. 5 Exhaust line, left vertical. Fresh air flue line, vertical from below through floor of vehicle Cramer air inlet pipe Truma roof flue Art.no.
  • Page 13 Fig. 6 Outside wall flue system The flue gas line through a flue pipe must never be installed at a slope. The maximum permissible length of the flue gas line is 2000 mm. The walls and elements located closer than 50 mm to the flue gas line must be covered or protected by materials of fireproof class M0 (see specified standards), e.g.
  • Page 14 Gas consumption: 240 g/h, propane/butane Electric power supply: DC +12 V, 5 A Date: 09/2005 b) CE approval number: CE-0085BQ0092 Service by the manufacturer: DOMETIC CRAMER SR s. r. o. Tehelná 8 SK – 986 01 Fiľakovo Phone: +421-47 4319100 ●...