See the Regulatory Notices for all regulatory and safety guidance prior to configuration.
Avant de procéder à la configuration, veuillez consulter les Avis de réglementation, afin de prendre connaissance des recommandations en matière de sécurité et de réglementation.
Get Started
Before you begin, make sure that you have the following:
•
Display HDMI cable(s)
•
Phillips #1 screwdriver and flathead screwdriver
•
(Optional) EDID emulator (see step 7)
Unpack the Poly Studio E70, PoE injector, Poly GC8, Conferencing PC, and 10 m USB-A to USB-C cable from their boxes. Note that
Page 1
Phillips #1 screwdriver and flathead screwdriver • (Optional) EDID emulator (see step 7) Unpack the Poly Studio E70, PoE injector, Poly GC8, Conferencing PC, and 10 m USB-A to USB-C cable from their boxes. Note that the Conferencing PC is shipped separately. www.poly.com/setup/poly-room-kits...
Page 2
8. (Optional) Connect a second monitor to the Conferencing PC. 9. Connect the Conferencing PC to Ethernet. 10. Connect the keyboard and mouse to the Conferencing PC. 11. Plug in and power on the Poly GC8 and then plug in and power on the other...
Need help?
Do you have a question about the Large Room Kit and is the answer not in the manual?
Questions and answers