Table of Contents
Advertisement
Memory
The system board has eighteen DIMM slots that support up to 144 GB maximum system memory (8
GB in each of the eighteen DIMM slots).
You must adhere to the following guidelines when adding or replacing memory modules:
•
For 2P system, both physical processors must be of the same type and speed.
•
Use 800/1066/1333 MHz DDR3 RDIMM/UDIMM.
•
Supported DIMM capacity: 2 GB, 4 GB and 8 GB.
•
Installation guide for 1P configuration:
○
Follow the sequence of 3A, 6B, 9C, 2D, 5E, 8F, 1G, 4H and 7I for the corresponding
processor when installing the memory.
•
Installation guide for 2P configuration:
○
Follow the sequence of 3A, 6B, 9C, 2D, 5E, 8F, 1G, 4H and 7I for the corresponding
processor when installing the memory.
○
Install at least one memory DIMM for each processor.
○
The memory quantity installed for each processor can be different.
Figure 41 DIMM Population
Removal and replacement procedures 74
Advertisement
Table of Contents
