To install the new processor:
Insert the processor into the socket, using the keys on the processor.
1.
CAUTION: With the load lever and the retention plate disengaged, hold the processor by its edges
and align it over the empty processor socket. Make sure that you properly align the processor with
the orientation notch on the socket.
Close the retention plate.
2.
Lock the load lever.
3.
Figure 38 Installing the Processor
CAUTION: To prevent overheating or a possible system crash, use only a heat sink model specified
for the HP ProLiant DL180se G6 server.
Removal and replacement procedures 72